066
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
067
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
DIGITAL INPUTS CONFIGURATION
The NI2400 has two digital inputs (IN1 & IN1) on its back side.
The digital inputs could be configured to acquire a
TrIgge r
or an
rAIN
gAUge
or an
AN
-
e M OM e Te r
.
The trigger could be used with a seismic station and it is used to start one or
more acquisitions extemporaneous.
NOTE:
in case of a rain gauge or anemometer, no elaboration of reading is considered
(ex: average speed, maximum, instantaneous, daily storage, etc.)
To set up a digital input it is necessary:
• to select the entry
chAnnEl
configurATion
,
then
digiTAl
inpuTS
;
• the page
digiTAl
inpuTS
configurATion
opens. In this page it is possible to set up 1 or
both digital inputs independently;
Figure 55
Figure 56
3
3
