MP1800
Dome Light Powered DVD Docking Station
INSTRUCTION
MANUAL
Connections:
Cautions Before Connection
• This product is designed for negative ground 12V DC operation only
• Before making connections, turn the car ignition off to avoid circuits
• Connect the red power input lead only after all other have been connected
• Run all ground wires to a common ground point
• Use of this product other than specified herein may result in exposure to hazardous radiation
Roof
Metal plate
Screws (not supplied)
Mounting fitting
Docking Station
Screws
Connecting the Power
1. First connect the black (GROUND) lead to a metal surface on the car
2. Connect the blue (DOOR+) or yellow (DOOR-) wire leads to the door switch of the car
3. Connect the yellow (POWER) wire input lead to the =12V power terminal.
Be sure to connect the black (GROUND) lead first.
fig.1
P.3
fig. 2
Battery
Door+
Blue
Door+
Yellow
+
-
Ground
Black
+12V
Red
Filter
Box
Docking Station
Power cord
with filter
Door
Door Switch -
Flat washers
