After the Dash Cam has shut down
completely, plug it back into your PC and
select ‘Power On’.
The update should begin automatically.
Once you have copied ‘FW222GA.bin’ to the
Dash Cam you can now unplug the Dash
Cam from your PC. It will shut down and
you will see the Nextbase logo.
10
Firmware Updating...
Update takes approx 1 minute
Do not disconnect power!
11
Firmware Updating...
Update takes approx 1 minute
Do not disconnect power!
Please ensure that the bin file is NOT
renamed in anyway, the update will fail if
the file appears as FW222GA(1).bin,
for example.
9
FWXXXX.bin
FWXXXX.bin
