DASH CAM SETTINGS (CONTD.)
DASH CAM SETTINGS (CONTD.)
Video menu continued:
3. Audio Recording
Turn On / Off the microphone.
Options: On and Off
Default Setting: On
4. Number Plate
Enter the registration number for your vehicle, this will then be shown on the video file.
5. Video Length
Select the duration of the individual recorded video files. The Dash Cam will continue
recording, filling the memory card. When the memory card becomes full, the oldest file
will be automatically deleted to make space for the new recording.
Options: 1 Minute, 2 Minutes and 3 Minutes
Default Setting: 1 Minute
6. Parking Mode
There are two methods of using parking Mode, which one used is dependent on whether you
are using a ‘Permanent Live’ or ‘Switched Live’.
Permanent live:
This means that there is always 12Vdc being supplied to the Dash Cam. This can either by
using a 12Vdc outlet that does not power off when the vehicles ignition is turned off or by using
the Nextbase Hardwire Kit which has been installed using a permanent live fuse location.
Once Parking Mode has been turned on, the Dash Cam will enter standby mode when there is
no physical movement detected for a 5 minute period.
Switched live:
This method requires the Nextbase 380 battery pack to provide power to the Dash Cam, as
when the vehicles ignition is turned off the 12Vdc outlet will no longer supply power to the
Dash Cam.
Note:
- Without the 380 battery pack installed Parking Mode will NOT function upon a switched
live power supply.
When Parking Mode has been turned on, the Dash Cam enters standby mode when the
12Vdc supply has been turned off.
Once activated Parking Mode functions in the same way for both Switched and Permanent
power supplies:-
Should physical movement of the vehicle be detected, the Dash Cam will power on and start
recording a 1 minute protected video. If no further physical movement is detected then the
Dash Cam will return to standby mode.
If physical movement is detected, then the camera will continue to record normally, until no
physical movement detected for a 5 minute period, at which point the Dash Cam will return
to standby mode.
40
Summary of Contents for 380GW
Page 1: ...Instruction Manual ...
Page 50: ...NOTES ...
