16
17
English
MENU AND SETTINGS
Press the
button to enter the OSD menu.
Setup 1/5
Resolution
Rear Mirror Display
Exposure
WDR
Loop Recording
In general, use the or
button to select an option and press the button to confirm. To return to the previous
page, press the
button.
MENU OPTIONS
Resolution
Select the recording resolution, this will increase or decrease the quality of the recorded videos.
Loop Recording
Select the recording time for the individual video files. Once the microSD card is full, the camera will automatically
replace the oldest files with new files in a loop to allow continuous recording.
Rear Mirror Display
Turn on/off the display mirroring function when using the Cabin camera. When it is disabled, the image on the Cabin
camera screen appears as if the object is flipped horizontally.
00:00:13
30/04/2020
13:30:25
1440P+1080P
00:00:13
30/04/2020
13:30:25
1440P+1080P
Rear Mirror Display ON
(Mirror)
Rear Mirror Display OFF
(Normal)
Exposure
Adjust the exposure level for different light conditions.
WDR (Wide Dynamic Range)
Dynamic range is the ratio of the brightest portion of the image to the darkest portion of the image. When enabled,
the system records more details in the shadows while not over-exposing the bright areas. The downside is reduced
contrast, the image may look less natural but records more information.
Parking Mode
(Only available with optional hardwire kit connected)
Select the parking mode type.
• Off
: Disable the
Parking Mode
function.
•
Normal Mode
: Perform the interval recording when in
Parking Mode
. When the camera is on and then the car is
detected to be switched off (after ACC if power off), the system will automatically switch the recording mode from
Normal recording mode to Time-Lapse recording mode.
Video files can be selected by different frame rate. Available option: Off, 1fps, 2fps, 5fps, or 10 fps.
•
Intelligent Mode
: Activate the
Intelligent Mode
when in
Parking Mode
. When the camera is on and then the
car is detected to be switched off (after ACC if power off), the system will automatically trigger the emergency
recording when the camera detects an impact or object movement.
NOTE:
If no event is detected after 1 minute, the camera will return to Standby mode.
