MANUAL
5203
To set the alarm, please follow the steps below:
1. Push the switch on the left side to “SET ALM” , and then push switch on the
right side to “AL1” to set Alarm 1, “AL1/AL2” to set 2 alarms on the same
day, or “AL2” to set Alarm 2.
2. Press SET button first to set the hours
3. Press Up/Down button to adjust time
4. Press SET button second time to set the minutes
5. Press Up/Down button to adjust time
6. Press SET button third time to set snooze time (from 05 to 60 minutes)
7. Press Up/Down button to adjust value
8. Press SET button again to exit setting
9. Push the left switch to “LOCK” for changing the mode of the clock to standard
When you want the alarms to wake you up, please follow the steps below:
1. Make sure the left button is set on “LOCK”.
2. Push the right switch to one of the three modes (AL1 or AL1/AL2 or AL2).
AL1, you can only select the time you set under AL1. AL1/AL2, you can
select AL1, AL2 separately, or you can select both at the same time
AL1+AL2. AL2, you can select the time you set under AL2. If the alarm
not selected, the display will show “ - : - - “ .
3. Press SET button to start alarm function. A symbol of a bell is on at left
side next to the alarm time.
4. Press SET button again, the alarm function is off (The bell next to the
alarm time will disappear).
ALARM TIME
SETTING
ALARM
ON/OFF
