6
Only recharge with the recharger provided. Malfunctionings should be reported to the Help Center.
- disassembling, maintenance and battery replacement must be effected by an authorized professional.
Replacement must be made using original spare parts only. Problems with battery must be reported to
your dealer.
• BATTERY TEMPERATURE AND FEATURES
- Lithium-ion battery
- Charging time 3 hours
- 36 Volt
- Amps 4,4 Ah
- Use temperature -15C , 50C
- Charging temperature 0C – 40C
- Storage humidity 5% - 95%
• TRANSPORTATION OF THE BATTERIES
LITHIUM BATTERIES ARE CONSIDERED TO BE DANGEROUS MATERIAL. TRANSPORTATION OF
LITHIUM BATTERIES IS GOVERNED BY THE LAWS OF EACH INDIVIDUAL STATE.
• INSTRUCTIONS FOR CHARGING THE BATTERY
- Recharging must be effected exclusively by using the supplied recharger.
- Make sure it is fully dry.
- Connect the battery charger to the electrical mains (100V-240V; 50,60Hz), make sure it is switched on
and then connect the other end of the charger to the hoverboard.
- The red control light on the battery-charger means that it is charging correctly.
- When the control light goes from red to green, the battery is fully charged, so unplug the battery-charger.
• Charging time is about 3 hours.
• Keep the charging contacts clean and dry.
• If the battery compartment is not dry, do not charge the hoverboard.
BLUETOOTH FUNCTION
The hoverboard comes with an integrated speaker and a Bluetooth v4.2 device to transmit the music loa-
ded on a smartphone.
Compatible with smartphones equipped with the same technology BT v4.2.
The following instructions may change slightly depending on the smartphone model used.
Turn on your hoverboard.
The hoverboard will emit a sound signal telling you that Bluetooth is enabled.
- Go to your mobile device settings and choose Bluetooth.
- Start the pairing process on your mobile device. Your mobile device may automatically recognize your ho-
verboard as “Bluetooth speaker”.
- Select the new Bluetooth device from your mobile device and pair.
- There is no password required for pairing with the hoverboard.
- The hoverboard will emit a sound signal telling you the devices are paired.
- Now you can play your favourite music from your mobile device with the hoverboard internal Bluetooth
speaker.
- When you disconnect your mobile device, the hoverboardc will emit another sound signal to alert you.
OPERATION
The hoverboard moves thanks to the dynamic balance concept. It uses an internal system of sensors and
gyroscopes that allows it to move on the basis of the variation of the centre of gravity, instructing the whe-
els in real time to turn forwards or backwards to remain in a position of balance. By leaning forwards, you
will move forwards and the angle of inclination determines the speed at which you move. To turn it is suf-
ficient to gently transfer your weight to one of your feet. The hoverboard has a system of inertial stabiliza-
W A R N I N G S
Summary of Contents for Skylon 6.5
Page 9: ...9 ...