Your HD-STB is designed to give you trouble-free performance for many years. If you have a
problem with your HD-STB, try the solutions listed below.
Trouble Shooting Guide
Problem
No Picture, Sound OK.
The HDTV does not support
selected Video Resolution.
Check the Video Display Mode.
Refer Display Mode Change
on Page16.
Audio or Video Connection is
not good.
Check up the Audio/ Video
cable or connection.
The Sound is OK, but the
Picture is Blank.
The Picture is OK, but the
Sound is Blank.
The remote control is
not working.
Battery exhausted.
Remote control is incorrectly
aimed.
Blocked the HD-STB front panel.
Change the batteries.
Aim the remote control at HD-STB.
Check that nothing blocks the
front panel.
The universal TV key is
not working.
TV code is not setting.
Please refer to page 8.
The composite Video,
S-Video cannot work with
PB Zoom.
It is normal. PB Zoom is working
only HD Video Output.
Possible causes
What to do
The display on the front panel
does not light up.
Power cable is not connected.
AC POWER SWITCH is turned off.
Check up the Power cable which
is plugged in to the AC wall
mounted socked.
Turn the AC POWER SWITCH On
at the rear panel.
No Sound or Picture,
but the front 7 segment
show green light.
The HD-STB is not powered ON.
Press the power button on the
front or remote controller to
powered ON status.
Pixelated picture.
Signal to weak or No antenna
connect.
Check the antenna or antenna
connection. Simply check the
analog reception of TV.
31