25
Mounting the TV to the Lift
Irregular/Obstructed Back
Flat/Unobstructed Back
A
B
Diagram
“A”
installation procedure:
1) Place the flat screen TV face down on a protected surface.
2) Position the Vertical Mounting Bars equidistant from the bottom and top of the TV, with the slots facing toward the top of
the TV.
3) Using the four (4) Square Multi-Mount washers and the TV mounting screws selected from the bag, attach and tighten the
hardware.
DO NOT OVERTIGTHEN HARDWARE. DAMAGE TO TV MAY RESULT.
Diagram
“B”
installation procedure:
1) Place the flat screen TV face down on a protected surface.
2) Position the Vertical Mounting Bars equidistant from the bottom and top of the TV, with the slots facing toward the top of
the TV.
3) Using the four (4) spacers needed, (4) Square Multi-Mount washers and the TV mounting screws selected from the bag,
attach and tighten the hardware. The hardware will be used in this order (as shown in the diagram above): TV, Spacers,
Vertical Mounting Bars, Square Multi-Mount Washers, TV Mounting Screws.
DO NOT OVERTIGTHEN HARDWARE. DAMAGE TO TV MAY RESULT.
Summary of Contents for L-45ens
