6
Data Conn off
New Wi-Fi network detected
Installing the SIM/SD Card and Battery
Switch off your phone before installing or replacing the battery, SIM, or
memory card.
1.Remove the back cover
2.Hold the SIM card with the cut corner oriented as shown and slip it into
the card holder.
3.Insert the memory card into the card slot with the metal contacts facing
down until it inserts to the right position.
4.Insert the battery by aligning the gold contacts on the battery with the
gold contacts in the battery compartment. Gently push down on the
battery until it clicks into place.
5.Press the cover gently back into place until you hear a click.
Charging the Battery
When you first get your new phone you‟ll need to charge the battery.
Connect the adapter to the charger jack. Ensure that the adapter is
inserted with the correct orientation. Do not force the connector into the
charger jack.
Connect the charger to a standard AC wall outlet.
Disconnect the charger when the battery is fully charged.
Switching Your Phone On/Off
Make sure the SIM card is in your device and the battery is charged.
1.Hold Power Key to switch on your phone.
2.To switch it off, hold Power Key to get the phone options. Select Power
off, and then tap OK.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or reset it
to factory settings (see chapter Sorting out Your Phone Settings
– Privacy:
Reset to Factory Settings), you need to do some settings before using it.
Tap
Menu Key
in the standby mode, then select
System settings
>
Language & input
> Language to change the language you want to use,
if needed.
