NexxTech 1519006, Manual

7

6

Code Search

If your device does not respond after you have tried
all the codes for your brand, or if your brand is not
listed, try searching for your code by following these
steps.

1. Manually turn on the device (

TV

, 

VCR

, etc.) to

be controlled.

2. Press and hold the 

SETUP

 button until the red

indicator stays on, then release the 

SETUP

button.

3. Press and quickly release the desired mode

button (

TV

, 

VCR

, etc.). The red indicator blinks

once, then stays on.

4. Press the 

POWER

 button repeatedly (up to 300

times) until the device to be controlled turns off.
The red indicator blinks off with each button
press.

5. Press and release 

ENTER 

to install the code.

Most users will store VCR codes under the 

VCR

button, Cable codes under 

CABLE

, etc. If (for

example) you want to store a VCR code under

CABLE

, first follow the procedure for Direct Code

Entry (page 6) and press 

CABLE 

in step 2 of Direct

Code Entry, then enter ANY VCR code in step 3 of
Direct Code Entry. Then follow the steps above for
Code Search.

Write your codes down here for easy reference
later.

Direct Code Entry

1. Press and hold the 

SETUP

 button until the red

indicator stays on, then release the

 SETUP

button.

2. Press and release the desired mode button (

TV

,

VCR

, etc.). The red indicator blinks, then stays

lit.

3. Enter the 4 digit code from the code tables (on

separate sheet). Note: after a valid code entry,
the red indicator turns off.  For an invalid code,
the red indicator flashes.

4. With your device on, press

 POWER

. If the

device turns off, no further programming is
required. Note: If some buttons do not operate
your equipment, try one of the other codes for
your brand.

Device

Device stored Code

TV

TV

VCR
DVD
SAT/CBL