9
8
Using Your Remote
Code Identification
The Code Identification Feature allows you to
identify the 4 digit library code stored under your
device key. For example, if you want to find out what
4 digit code is stored under your TV device key,
follow the six steps below:
1. Press and hold the
SETUP
button until the red
indicator stays on. Release the
SETUP
button.
2. Press and release the desired mode button (
TV
,
VCR
, etc.). The red indicator blinks once, then
stays lit.
3. Press and release the
SETUP
button. The red
indicator blinks once and remains lit.
4. To find the first digit for the code stored under
the mode key pressed in step 2, press each
numeric key from
0-9
in turn. The number that
causes the indicator light to blink is the first digit
in your code.
5. To find the second and third digit, repeat step 4.
6. Repeat step 4 again to find the fourth digit. This
time the red indicator turns off and stays off.
Using Your Remote, cont.
Sleep Function
The Sleep button enables the remote to turn off
your TV after a period of 1 to 99 minutes as shown
below. The remote must be in TV mode to set a
Sleep Timer. This feature works even if your TV
does not have a sleep feature.
1. Press and release the
TV
mode button.
2. Press and hold the Sleep button until the LED
remains lit (about 2-3 seconds).
3. Release the Sleep button.
4. Press and release the numeric keys (01-99) for
the time required. The LED will blink off to
indicate button press acceptance.
5. TV Sleep Timer is set.
6. Leave the Remote pointing towards the TV
with an unobstructed path.
To cancel the Sleep Timer, press and hold the
Sleep button until the LED blinks, or press and
release the Power key in TV mode.
Summary of Contents for 1519006
Page 1: ...UniversalRemote 1519006 TM...
