NexxTech 1519006, Manual

13

12

Remote does not operate your product.

• Press the mode button of the product you want

to control.

• Program the remote with a new code.
• Install new batteries. (You might have to

reprogram your remote after installing new
batteries.)

• Remote may not be compatible with your

product.

Remote does not operate some features of
your product.

• Sometimes a particular code might operate

some features but not all. Try programing
remote with a new code.

• Remote may not be able to operate all features

of your device or button names might be different
than your product. Try other buttons on the
remote. E.G. controlling the MENU cursor may
be performed by CHAN or VOL buttons.

Red Indicator blinks after you program a
product code.

• Remote did not accept the code.
• Try to program the code again or try a different

code.

Troubleshooting

Using Your  Remote,  cont.

Setting any Mode to use its own
Volume/Mute Control

This routine can set any Mode to use only its own
Volume/Mute control. Note - If your chosen Mode
has no Volume/Mute functions of its own then the
Volume/Mute buttons will do nothing.

1. Press and hold the 

SETUP

 button until the red

indicator turns on, then release the button.

2. Press and hold the 

MUTE

 button until the red

indicator blinks once and stay on, then release
the button.

3. Press and release the desired Mode button (

TV

,

VCR

, etc.), the red indicator blinks once then

stays on.

4. Press and release the 

VOLUME-

 (Down) button,

the red indicator blinks once then stays on.

5. Press and release the 

MUTE 

button and the red

indicator turns off.

Your chosen Mode will now use its own Volume/
Mute control.