4.21 Turning the Output On or Off Rapidly
KP3000S
179
3.
Set the gain in the [Gain] item.
4.21 Turning the Output On or Off Rapidly
In the factory default settings, the internal output relay of this product is activated linking to the
output on/off. In the output off state, the internal circuit, output terminal, and the outlet of this
product are physically separated. On the other hand, if the output relay chattering causes any
problem, or if you want to turn the output on or off rapidly, you can disable the activation of the
output relay. In that case, the output relay is fixed to the on state and the operation to turn the output
on/off is performed by the semiconductor device. The output off state means the state of high
impedance. Table 4-13 shows the list of the output terminal impedance (reference values in the rear
output terminal) in the output off state when the output relay control is disabled.
Table 4-13 The Output Terminal Impedance (Reference Values
in the Rear Output Terminal) in the Output Off State when the Activation of the Output
Relay is Disabled
AC/DC mode
100 V range
200 V range
AC and ACDC
modes
200 k
Ω
4
N
+ 3
200 k
Ω
4
N
+ 3
200 k
Ω
2
N
+ 3
200 k
Ω
2
N
+ 3
DC mode
200 k
Ω
4
N
+ 1
200 k
Ω
4
N
+ 1
200 k
Ω
2
N
+ 1
200 k
Ω
2
N
+ 1
* N indicates the number of the power units energized.
Summary of Contents for KP3000S
