3.3 Basic Key Operations
KP3000S
37
3.3.5 Entering Values (Numerical Entry Box)
Entering values with arrow keys/jog or shuttle
For an item to set value, hover the cursor over the value (which will be highlighted) and press the
ENTER key to open a numerical entry box shown in Figure 3–14 in which you can enter a value.
Move to the desired digit by using the right or left arrow key and increment/decrement the value by
using the up or down arrow key/the jog or shuttle. During the edit, the value is confirmed every time
it is incremented or decremented. The value for the voltage or frequency output is applied even
during the edit. If you press the ENTER key or the CANCEL key, the numerical entry box is closed.
Enter values directly by using the numeric keypad
For an item required to set values, hover the cursor over a value (which will be highlighted) and
enter a new value by using the numeric keypad. A numerical entry box opens as you start entering a
value, and the entered value is displayed. Press the ENTER key to confirm the value. The previous
values for the voltage or frequency output are held until you press the ENTER key. If you press the
CANCEL key, the settings are not changed.
Figure 3-14 The Numerical Entry Box
--------
Notes
------------------------------------------------------------------------------------------------------------
If you already know the value to set, the direct entry using the numeric keypad will be
convenient.
If you want to increment/decrement the value by one step at one time, use the up and down
arrow key.
If you want to increment/decrement the value by a large amount step by step, use the jog.
If you want to increment/decrement the value by a large amount quickly, use the shuttle.
-----------------------------------------------------------------------------------------------------------------------------
3.3.6 Entering Strings (Character String Entry Box)
Enter the name of the data when saving it to the internal memory or USB memory. In this case,
hover the cursor over the string (which will be highlighted) and press the ENTER key. This
operation opens a character string entry box shown in Figure 3-15.
When you turn the jog or press the up or down arrow key in a character string entry box, the
character at the cursor (highlighted character) is changed in a way shown in Table 3-5. When you
press a key in the numeric keypad, the corresponding value or symbol is entered. To move the cursor
position, use the right or left arrow key. When you press the ENTER key, the edited string is
confirmed and the character string entry box is closed.
Summary of Contents for KP3000S
