Quick Nav
Table of Contents
Introduction
I/O Module Panel Layouts
Snare and Tom Trigger Zones
NFUZD USB Key (Drive) and Data Management
NSPIRE Series I/O Module Navigation
Trigger Settings
Hi-Hat (HH) Trigger Settings
Kit Menu
Reverb
EQ
Mixer Menu
Saving a UserKit
Adjusting the MIDI Map
Trigger Function Settings
Click Menu
SEQ Menu
Integration with Computer
Setup Suggestions
Sync Key
Auto O
ff
and Sleep Mode
BFD Eco NFUZD Edition
NSPIRE Series I/O Module Settings
Getting Started w/ BFD Eco NFUZD Edition
Basic Mixing Adjustments
BFD Eco NFUZD Edition E
ff
ects
Grooves Page
Options Menu
Help Menu
Changing BFD Eco NFUZD Edition Presets
Changing Drum Sounds
Adjusting Instrument Parameters
FX Slots
Instrument and Mixer Faders
Getting New Professional Sounds
User .wav Samples
Exporting Sound Banks
Loops
Installing Sound Banks
BFD Eco Jukebox Player
BFD Eco Master Output Recording
BFD Eco Mixing Tips
Included Sounds
Integration with Computer
Interface Connections
USB
There are two USB connectors on the side of the NSPIRE module. One of the ports is for adding data to the module and the other is
for direct computer connection.
The NSPIRE Module is a MIDI / Audio interface. That means that the NSPIRE module will also output the sound of BFD Eco NFUZD
Edition through the outputs on the drum module. This system is fixed at 44.1 kHz. Any software from your computer can use the
NSPIRE I/O Module as a sound card. The NFUZD Audio USB Key contains the drivers needed for Windows. The unit is class compliant
on the Mac platform.
MIDI Port
The MIDI connection on the back of the NSPIRE module is a MIDI Out port. The reason we include this port is for users that want to use
their own Audio Interface. As with all MIDI / Audio interfaces, a conflict can occur when there is more than one interface hooked up to
the computer. In that case the easiest way to work is often the use of the MIDI port. You will connect the MIDI out from the module to
the MIDI in on your other interface. This gives you options to work the way that you want with any additional gear. If you are only using
the NSPIRE I/O Module, you can use it as your MIDI and Audio interface.
3 3
POWER
ETHERNET
(INACTIVE)
MIDI
SNARE
BA
SS DRUM
RIDE
CRA
SH
1
**CRA
SH
2
*HI-HA
T P
AD
*HI-HA
T
C
ONTROLLER
**PERCUS
SION
**TOMS
