Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. The battery must be inserted into the backside of the
phone (see illustration below
). Align the battery contacts with
the phone connector inside the battery tray, and let it slide
down in position. When done, put the hind cover of the phone
back and make slight pressures along the cover rim.
Charging the battery
Please charge the battery completely before starting to use the
device. Use the provided USB cable, connecting one end to the
provided wall socket adaptor (placed into a socket) and the
other end to the USB connector placed on the left side of the
phone. The phone can also be charged by connecting it to a PC
USB port but in that case it will charge more slowly. While the
battery is charging, an animation on screen will show the
charging progress if the phone is on. Once charge is completed,
the icon will be filled and the phone can be disconnected from
the grid. With the phone turned off, a red led will indicate the
charging process and will turn green when the battery is full.
Warning:
Do not connect the phone to a booting-up or running
down PC to avoid voltage jumps. In order to preserve the correct
functioning of the device and in order not to compromise
warranty, the sole use of original NGM battery chargers and
accessories are recommended.
Please charge the battery
indoors, in a dry and favorable environment. It’s normal for the
battery to get slightly warm during the charging process. The
battery will reach the full capacity when cycled several times.
