![background image](http://html1.mh-extra.com/html/ngx-technologies/lpc4330-xplorer/lpc4330-xplorer_user-manual_1685221015.webp)
User Manual: LPC4330-Xplorer
Page | 15
3.3.1 LEDs
Test setup and verification
:
As soon as the Xplorer is turned ON or reset; the test LEDs go ON & OFF for a couple of times, this
simple test validates the LEDs. The Xplorer has one Green LED and one Blue LED. These LEDs are also
connected to the outputs of the SCT lines. Please refer to the schematics for more details.
3.3.2 USB1 (Virtual COM port)
Test setup and verification
:
For the very first time the Windows machine will ask for the appropriate Virtual COM drivers to be
installed.
Steps to select USB1 VCOM port on HyperTerminal in Windows 7 machine:
Step 1: Open a HyperTerminal, Enter the name and then click on OK.
Fig.12