User Manual: LPC4330-Xplorer
Page | 19
3.3.4 USB0 (HID device)
Test setup and verification
:
Connect the USB cable to USB0 connector. The USB enumeration can be checked in device manager.
The Xplorer enumerates as a Human Interface Device (HID). On a Windows machine this can be
confirmed by looking in to the ‘Device Manager’ under ‘Human Interface Devices’.
Fig.17
Note: The Xplorer is shipped with only one ‘USB AM to micro B’; to test the USB1 interface you would
require another similar cable. In the subsequent firmware releases the firmware would configure the
USB0 port as USB host
.