NI 5752 Getting Started Manual Download

Page: 7 / 16

Confirming that Measurement & Automation
Explorer (MAX) Recognizes the Device

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which devices reside in the system and how they are configured.
MAX is automatically installed with FlexRIO Support.
1.

Launch MAX by navigating to

Start

All Programs

National Instruments

NI MAX

by clicking the NI MAX desktop icon.

In the Configuration pane, double-click

Devices and Interfaces

to see the list of installed

devices. Installed devices appear under the name of their associated chassis.

(PXI and PXI Express devices only) Expand your

Chassis

tree item. MAX lists all

devices installed in the chassis. Your default device names may vary.

Note

If you do not see your hardware listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure
the device is correctly installed, and restart.

(Controllers for FlexRIO only) Your device appears under the

Remote Devices

section.

Front Panel and Connector Pinouts

The following figure shows the front panel connectors for the NI 5752/5752B.

NI 5752/5752B Getting Started Guide

Summary of Contents for 5752

















Search results

Summary of Contents for 5752

Reviews:

Related manuals for 5752

Brands by name

Popular brands

NI 5752, Getting Started Manual

Search results

Summary of Contents for 5752

Reviews:

Related manuals for 5752

Brands by name

Popular brands