1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose
components or any other sign of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the cRIO-9036 kit.
Installing Software on the Host Computer
Before using the cRIO-9036, you must install the following application software and
device drivers on the host computer in this order:
Sequence cRIO-9036
cRIO-9036 Sync
1
LabVIEW 2014 SP1 or later
LabVIEW 2016 or later
2
LabVIEW Real-Time Module 2014 SP1
LabVIEW Real-Time Module 2016 or later
3
LabVIEW FPGA Module 2014 SP1 or
later
LabVIEW FPGA Module 2016 or later
4
NI CompactRIO Device Drivers
February 2015 or later
NI CompactRIO Device Drivers August 2016
or later
For minimum software support information, visit
and enter the Info
Code swsupport.
1
LabVIEW FPGA Module is not required when using Scan Interface mode. To
program the user-accessible FPGA on the cRIO-9036, LabVIEW FPGA Module is
required.
ni.com
8
cRIO-9036 Getting Started
