background image

 

 

 12 

• 

Declaration of Conformity (DoC)—

 A DoC is our claim of compliance 

 

with the Council of the European Communities using the manufacturer’s 

 

declaration of conformity. This system affords the user protection for 

 

electronic compatibility (EMC) and product safety. You can obtain the DoC 

 

for your product by visiting 

ni.com/certification

• 

Calibration Certificate—

 If your product supports calibration, you can 

 

obtain the calibration certificate for your product at 

ni.com/calibration

If you searched 

ni.com

 and could not find the answers you need, contact your 

local office or NI corporate headquarters. Phone numbers for our worldwide 
offices are listed at the front of this manual. You also can visit the Worldwide 
Offices section of 

ni.com/niglobal

 to access the branch office Web sites, which 

provide up-to-date contact information, support phone numbers, email 
addresses, and current events. 

 

 

 

 

 

 

 

 

 

 

 

Worldwide Technical Support and Product Information 

ni.com 

National Instruments Corporate Headquarters 

11500 North Mopac ExpresswayAustin, Texas 78759-3504USATel: 512 683 
0100 

Worldwide Offices 

Australia 1800 300 800, Austria 43 662 457990-0, Belgium 32 (0) 2 757 0020, 
Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 5050 9800, Czech 
Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 358 (0) 9 725 
72511, France 01 57 66 24 24, Germany 49 89 7413130, India 91 80 41190000, 
Israel 972 3 6393737, Italy 39 02 413091, Japan 81 3 5472 2970, Korea 82 02 
3451 3400, Lebanon 961 (0) 1 33 28 28, Malaysia 1800 887710, Mexico 01 
800 010 0793, Netherlands 31 (0) 348 433 466, New Zealand 0800 553 322, 
Norway 47 (0) 66 90 76 60, Poland 48 22 3390150, Portugal 351 210 311 210, 
Russia 7 495 783 6851, Singapore 1800 226 5886, Slovenia 386 3 425 42 00, 
South Africa 27 0 11 805 8197, Spain 34 91 640 0085, Sweden 46 (0) 8 587 
895 00, Switzerland 41 56 2005151, Taiwan 886 02 2377 2222, Thailand 662 
278 6777, Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545 

For further support information, refer to the Cross referenceolor:Blueparatext 
appendix. To comment on National Instruments documentation, refer to the 
National Instruments Web site at ni.com/info and enter the info code feedback. 

© 2007 National Instruments Corporation. All rights reserved. 

Summary of Contents for MES-3980














Reviews: