A-6
|
ni.com
Appendix A
Specifications
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Minimize Our Environmental Impact
web
page at
ni.com/environment
. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers
At the end of their life cycle, all products
must
be sent to a WEEE
recycling center. For more information about WEEE recycling centers and National
Instruments WEEE initiatives, visit
ni.com/environment/weee.htm
.
Backplane
Size....................................................................3U-sized; one system slot (with three system
expansion slots) and seven peripheral slots.
Compliant with IEEE 1101.10 mechanical
packaging.
PXI Express Specification compliant.
Accepts both PXI Express and CompactPCI
(PICMG 2.0 R 3.0) 3U modules.
Backplane bare-board material .........................UL 94 V-0 Recognized
Backplane connectors .......................................Conforms to IEC 917 and IEC 1076-4-101, and
are UL 94 V-0 rated
System Synchronization Clocks
(PXI_CLK10, PXIe_CLK100, PXIe_SYNC100)
10 MHz System Reference Clock: PXI_CLK10
Maximum slot-to-slot skew ..............................500 ps
Accuracy ...........................................................±25 ppm max (guaranteed over the operating
temperature range)
Maximum jitter .................................................5 ps RMS phase-jitter (10 Hz to 1 MHz range)
⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩ ˄Ё
RoHS
˅
Ёᅶ᠋
National Instruments
ヺড়Ё⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)
