Page 10 NIAGARA VIDEO
CORPORATION
2.3 Check Package and Contents
The MINI 150 package includes the following:
Base Unit x1
Power Supply x1
HDMI cable x1
WiFi Antenna x2
RCA AV cable x1
Flash Drive with User Guide x1
2.4 Equipment Wiring and Connection
To avoid electric shock and damage to the equipment, before setting up the wiring connection,
please power off the equipment and all other connected external devices. Powering on the
equipment only after all the wiring connection is completed.
2.4.1 Power Connection
Use the proper power connections is vital to the safe operation of the portable encoder. Only use
the supplied 3-prong power connector or one with equal specifications. Never tamper or remove
the 3
rd
-Prong grounding pin. This could cause damage to the Portable Encoder.
2.4.2 DC Power Connection
The MINI 150 encoder is intended to be use on either 120V or 240V systems. The power supply
will automatically detect the system which is connected to. To hook up the power use the
following steps:
1. Locate the DC power cord which is included with the MINI 150.
2. Plug the female end of the power cord (end with no prongs) into the back of the unit.
3. Locate a protected outlet (usually inside of the rack) to plug the male end of the power cable
into.
