58
Português -
Finger position:
a-
Follow the image below to register the fingerprint correctly.
•
Always place the finger on the center of the sensor.
•
Make sure covering all the surface sensor with as much of your finger as possible.
•
Do not place the finger away from the sensor area.
•
Do not place the finger on the diagonal.
•
Do not take away the finger during the fingerprint verifying process.
•
Do not use only the finger tip.
•
Do not slide the finger during the fingerprint verifying process.
b-
Also, it is suggested that every user register 2 or more fingerprints.
c-
Fingers too damp, dry, oily or dirty can affect the fingerprint identification.
d-
Avoid fingers that have callus, peeling or injuries to ensure success in the registration
and identification.
e-
In case of low recognition rate, delete the fingerprint registration and register it again.
a-
Remove the batteries cover.
b-
Use a paperclip, inserting it in the indicated local in the image below to reset the
Biometric Lock.
c-
Press the reset button for 5 seconds until hear a beep.
Note:
ALL information will be deleted.
3.4- FINGERPRINT
EN
3.5- FACTORY DEFAULT RESET
Reset button
English - 58
