Nice M-Fab ME3000 Instructions And Warnings For Installation And Use Download

Page: 5 / 40

English –

CAUTIONS:

•

The technical features set out refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to make alterations to the product

any time it deems it necessary, keeping the same functionality and destination of use.

ME3000

ME3010

ME3000L

ME3000/110

ME3024

ME3024HS

Power supply

230 Vac; 50 Hz

110 Vac; 60 Hz

24 Vdc

Absorbed current

1.2 A

1.3 A

2.4 A

5 A

6 A

Absorbed power

250 W

300 W

250 W

120 W

170 W

Incorporated capacitor

10 uF

30 uF

–––

Protection class

IP 67

Speed

1.14 Rpm

0.8 Rpm

1.4 Rpm

2.6 Rpm

Torque

300 Nm

250 Nm

300 Nm

250 Nm

180 Nm

Operating temperature

-20 °C to +50 °C

Thermal protection

140 °C

–––

Work cycle

30 %

40 %

30 %

80 %

Weight

11 Kg

11.5 Kg

11 Kg

TECHNICAL FEATURES OF THE PRODUCT

Accessories On Request

PLA10 Vertical electric lock 12 Vac

PLA11 Horizontal electric lock 12 Vac

MEA3 Lever-operated release mechanism

MEA1 360° opening device

MEA2 Key-operated release mechanism

CE declaration of conformity and declaration

of incorporation for a “quasi-machine”

Declaration in accordance with Directives: 2004/108/EC (EMC); 2006/42/EC

(MD) annex II, part B.

Note

- The content of this declaration corresponds to the declaration made in the of-

ficial document filed in the offices of Nice S.p.a., and particularly the latest version
thereof available prior to the printing of this manual. The text contained here has been

adapted to meet editorial requirements. A copy of the original declaration may be re

quested from Nice S.p.a. (TV) I.

Declaration number:

134/METRO

Revision:

Language:

Name of manufacturer:

NICE S.p.A.

Address:

Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.

Person authorized to provide technical documentation:

NICE S.p.A. – Via Pezza

Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.

Product type:

Electric gearmotor for swing gates.

Model / Type :

ME3024, ME3000,ME3000L, ME3000/110, ME3010, ME3024HS

Accessories:

No accessory.

The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his
own responsibility that the products identified above comply with the provisions of the
following directives:

• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of

December 15 2004 concerning alignment of Member States’ legislation regarding

electromagnetic compatibility and abrogating directive 89/336/EEC, according to
the following harmonized standards: EN 61000-6-2:2005; EN 61000-6-3:2007 +
A1:2011.

The product also complies with the following directive in accordance with the require

ments for “quasi-machines”:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May

17 2006 regarding machines and amending directive 95/16/EC (consolidated text).

– I declare that the pertinent technical documentation has been prepared in accord-

ance with Annex VII B to Directive 2006/42/EC and that the following essential re

quirements have been met:

1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 -1.2.6 - 1.5.1 -1.5.2 - 1.5.5 - 1.5.6 - 1.5.7 - 1.5.8 -

1.5.10 - 1.5.11.

– The manufacturer agrees to send the national authorities pertinent information on

the “quasi-machine” in response to a motivated request without affecting its intel

lectual property rights.

– If the “quasi-machine” is operated in a European country with an official language

other than the language used in this declaration, the importer must associate a
translation with this declaration.

– The “quasi-machine” must not be operated until the final machine in which it is to

be incorporated is declared to conform to the provisions of Directive 2006/42/EC, if

applicable to it.

The product also complies with the following standards: EN 60335-1:2002 + A1:2004
+ A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011; EN 60335-
2-103:2003 + A11:2009.

The parts of the product which are subject to the following standards comply
with them: EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002; EN
12978:2003 + A1:2009.

Oderzo, 30 April 2015

Eng.

Mauro Sordini

(Chief Executive Officer)