Nice PP7124, Instructions And Warnings For Installation And Use

ENGLISH – 

27

PRODUCT MAINTENANCE

10

10 

PRODUCT MAINTENANCE

The automation must be subjected to regular maintenance to 

keep its safety level constant and guarantee long-lasting op-

eration; to this aim, 

POP

 has a manoeuvre counter and main-

tenance warning system; refer to the “

“Maintenance notice” 

function

” paragraph.

a 

Maintenance must be carried out strictly in com-

pliance with the safety provisions provided in this 

manual and in accordance with the laws and regu-

lations in force.

To carry out maintenance on the gearmotor:

1. 

Schedule  maintenance  interventions  within  maximum  6 

months  or  after  maximum  20.000  manoeuvres  from  the 

previous maintenance intervention

2. 

disconnect all power supplies, including any back-up bat-

teries

3. 

check for any deterioration in the materials making up the 

automation, with special emphasis on erosion or oxidation 

of the structural parts; replace any parts that are not to 

standard

4. 

check the state of wear of moving parts: pinion, rack and 

all gate leaf components; replace any worn parts

5. 

connect the power supplies again and run all the tests 

and checks described in the “

Testing

” paragraph.

PRODUCT DISPOSAL

11

11 

PRODUCT DISPOSAL

l 

This product is an integral part of the operator and 

must therefore be disposed of with it.

As with the installation, only qualified personnel must dismantle 

the product at the end of its life.

This product is composed of different types of materials. Some 

of these materials can be recycled; others must be disposed of. 

Please enquire about the recycling or disposal systems in place 

in your local area for this type of product.

a 

WARNING
Some parts of the product may contain polluting or 

dangerous substances. If not disposed of correctly, 

these substances may have a damaging effect on 

the environment and human health.

l 

As indicated by the symbol shown 

here, this product must not been 

disposed of with household 

waste. Separate the waste for dis-

posal and recycling, following the 

methods stipulated by local reg-

ulations, or return the product to 

the seller when purchasing a new 

product.

a 

WARNING
Local regulations may impose heavy penalties if 

this product is not disposed of in compliance with 

the law.