Pallet Scale
(2) Operations
1. Turn the power switch ON.
The power switch is located on the right side of the indicator.
WARNING
: Avoid leaving
ANY
load before turn the power switch ON.
2. Pressing ON key of front panel.
3. Display will show “0”,
make sure that
ZERO lamp is ON.
4. When the FORK lift the load, weighing is performed.
WARNING
: Fork have to properly level so as to center bubble of the
leveling gauge inside the indicated circle and fork truck should
not move.
5. If you want to adjust zero range, press the ZERO key.
6. If you want to use tare function, press the TARE key.
If you don't want to use tare function any more, remove the container(pallet)
and press the TARE key.
7. If you want to down the fork, pull the DOWN LEVER.
If you want to lift the fork, press the STOPPER and operate the
LIFT HANDLE.
