2
Contents
2
Symbols
2
Intended Use
3
Warning and Safety Information
3
Warranty
4
Installation Instructions
6
Installation
9
Care and Maintenance
10
Use of in Legal Metrology in the EU (or EEA)
10
Declarations of Conformity
11
Accessories
12 Zertifikates
The following symbols are used in these instructions:
§
indicates required steps
$
indicates steps required only under certain conditions
> describes what happens after you have performed a certain
step
– indicates an item in a list
!
indicates a hazard
Make sure you observe the following warning and safety
information in its entirety during installation and operation,
as well as while performing maintenance and repair work
on the equipment. It is important that all personnel using
the Combics equipment understand this information, and
have access to it at all times.
Furthermore, the warning and safety information supplied
with any electrical equipment connected, such as the
indicator, must be observed as well. The warning and safety
information can be supplemented by the equipment
operator. Make sure all operating personnel are informed of
any additions to these instructions.
Intended Use
The weighing platform and the connected indicator
are intended exclusively for use in weighing.
Summary of Contents for Sartorius Combics CAPXS Series
