3
MAIN FONCTIONS
1.
AUTO RUNNING MODE
Press “Mode” until the LED display shows
. The fixture will auto run six built-in programs
-
. The user can set their running speed and strobe speed via the Built-in Programs (see below)
2.
BUILT-IN PROGRAMS
Press “MODE” until the LED display shows
Pr. 1
.
Menus: Static Color + Strobe Speed
a)
Press a few seconds on “MODE” to select
Static Color
and use buttons “UP” or “DOWN” to select
the color. Press “MODE” to go back to the previous menu.
b)
Press a few seconds on “MODE” until the LED display shows a signal starting with
F
. Release the
button. Use buttons “UP” or “DOWN” to select the strobe speed
F.00-F.99
. Press “MODE” to go
back to the previous menu.
Press “MODE” until the LED display shows a program between
PR.2 – PR.7
.
Menus: Running Speed +
Strobe Speed
a)
Press a few seconds on “MODE” until the LED display shows a signal starting with
5
.
Release the
button. Use buttons “UP” or “DOWN” to select the running speed of the built-in programs
5.01-5.FL
. Press “MODE” to go back to the previous menu.
b)
Press a few seconds on “MODE” until the LED display shows a signal starting with
F
. Release the
button. Use buttons “UP” or “DOWN” to set the strobe speed:
F.00-F.99
. Press “MODE” to go back
to the previous menu.
3.
DIMMING MODE
Press “MODE” until the LED display shows
Press the « MODE » for a long time, the menu will switch between the LED CW brightness, LED WW
brightness, and LED strobe speed.
a)
Press a few seconds on « MODE » until it shows a signal starting with
“C”
Release the button. Use
buttons “UP” or “DOWN” to adjust the brightness of LED C00-CFL
b)
Press a few seconds on « MODE » until it shows a signal starting with
“U”
. Release the button. Use
buttons “UP” or “DOWN” to adjust the brightness of LED G U00-UFL
c)
Press a few seconds on « MODE » until it shows a signal starting with “F”. Release the button. Use
buttons “UP” or “DOWN” to adjust the LED strobe speed F00-F99
4.
SOUND ACTIVE MODE
Press “MODE” until the LED display shows
Press a few seconds on “MODE” until it shows a signal starting with
5
. Release the button. Use buttons “UP”
or “DOWN” to adjust the sensitivity from
0-31
. Press “MODE” to go back to the previous menu.
5.
DMX MODE
