5
6. MASTER/SLAVE MODE
Press “MODE” until the LED display shows
SLA
-If the host signal (Master) is not received, the LED is off. If the host signal (Master) is received, it will follow
the host operation.
7. RESTORE FACTORY SETTINGS
Press “MODE” until the LED display shows
.
a)
Press “MODE” for a long time until the LED display shows
r St
,
release the button. Press ”UP” to
restore the factory settings.
b)
When the fixture doesn’t start normally, press “MODE” + “UP” a long time until the LED display
shows
r St
and flashes. Release the buttons to restore factory settings.
