●
Turn ON/OFF switch to OFF and unplug your wheel from the power
source before cleaning or inspection.
●
Never hose down the machine. Clean off the potter's wheel with a
damp cloth. Drain your splashpan regularly to avoid a build up of
excessive water and clay. Detach the splashpan after each use and
clean out thoroughly.
●
Touching switches or plugs with wet hands may result in electrical shock.
●
Your wheel comes with rubber handles provided for covering the
handle openings. Promptly replace any loose or missing rubber handles.
Do not insert your ngers or any objects in through these openings.
●
Do not tamper with the electrical circuit and controller of your wheel.
You may be at risk of getting an electrical shock. Your potter's wheel
is a precision instrument and it is advised that you refer operation
or performance complaints to a Shimpo-referred, quali ed technician.
●
Use good judgement and caution when in use around children.
Adult supervision must be provided when using around children.
●
Take off metal accessories such as rings and watches before handling.
●
Do not pick up the wheel by the wheelhead. You may bend the shaft.
Lift using only the handles.
●
Unplug your wheel from power source if you will not be using it for an
extended period of time.
STOP
STOP
8.At "0" rpm the wheelhead can be turned
freely for use as a banding wheel.
7.DO NOT change rotation direction while
motor is running. Do so only after
wheelhead has come to a complete stop.
●
Adjust the stiffness
Turn off the power and unplug the cord.
Remove the legs and cover with the
provided wrench.
Adjust the stiffness of the pedal by
tightening the nut in the pedal shaft
with the provided wrench.
Fix the cover and legs after adjustment.
Pedal might get stiff or loose after long year usage.
In this case, please adjust the stiffness by following procedures.
Do not touch the other parts.
It might cause defects.
