26
OPERATING PROCEDURE: Measurement Method
3.2.1
Eye Care card use
AR-measured data saved on the optional Eye Care card can be transferred to the RT, PC, or such.
Data is saved to the Eye Care card at the following times.
1
Insert a card into the Eye Care card slot before
measurement.
Insert the Eye Care card as far as it will go with the symbol
(
▼
) pointing toward the device.
Confirm that the Eye Care card is properly inserted by referring to the Eye Care card icon (
) on
the screen.
2
Perform AR measurement as normal.
3
Print the measured results.
Data is saved on the card at the same time.
Eye Care card is inserted before measurement.
Saved upon printing.
Eye Care card is inserted after measurement.
Saved when the card is inserted.
Yellow display
Accessing Eye Care card
Blue display
Blank Eye Care card inserted
Blinking blue display
Eye Care card with data inserted
Blinking yellow display
Accessing Eye Care card failed
Card may be damaged.
• To compare vision with LM data using the vision comparison function in subjective measurement,
insert an Eye Care card with the LM data measured by a lensmeter.
• When an Eye Care card containing LM data is inserted into the Eye Care card slot with the “76. LM
DATA PRINT” parameter set to “YES”, the data is automatically printed.
• Both AR-measured and LM-measured data of one patient can be written to one Eye Care card.
Either set of data may be written first. The data must be from the same patient.
• When printing is performed with an Eye Care card containing saved data inserted, the AR data is
overwritten and saved.
Summary of Contents for ARK-1S
Page 1: ...AUTO REF KERATOMETER AUTO REF KERATOMETER ARK 1s ARK 1s OPERATOR S MANUAL OPERATOR S MANUAL ...
Page 6: ...IV ...
Page 76: ...70 OPERATING PROCEDURE Operation when Peripheral Devices are Connected ...
Page 112: ...106 SPECIFICATIONS AND TECHNICAL INFORMATION EMC Electromagnetic Compatibility ...
