69
CHECK AND ADJUSTMENT PROCEDURES: Groove Depth Check and Adjustment
2)
Press the numeric field of “Dep:” in the “Groove
size” field.
The numeric keypad appears.
3)
Enter a value with the numeric keypad and
press .
Enter 0.0 to “Dep:”.
Enter 0.6 (minimum value) to “Wid:”.
11
Press .
The layout screen appears.
12
Continue the processing method on the layout screen using the same procedures
explained by the following steps starting from size setting.
to
13
Check the groove depth of the processed lens.
•
Check that the groove is slightly made (the depth is within 0.10 mm) on the processed lens.
14
until the desired groove depth is obtained.
