13
INSTALLATION: Connecting the Pump Tank
4
Connect the drain pipe to the aperture on
the bottom of the LE-700 main body.
Push the hose adapter while aligning the hook of the
hose adapter with the indentations on the underside
aperture of the LE-700 and turn the light blue ring
counterclockwise to secure the adapter.
5
Connect the feedwater hose to the LE-700.
There are two inlets for feedwater hoses on the bot-
tom of the main body. As viewed from the front, the
rear inlet is for Pump 1 and the front inlet is for Pump
2.
Refer to the hose connection sticker shown to the
right.
1)
Push the feedwater hose labeled as
into the
rear inlet as viewed from the front.
Push the hose until it clicks.
2)
Push the feedwater hose labeled as
into the
front inlet as viewed from the front.
Push the hose until it clicks.
“2.5.1 Pump tank connection diagram”
6
Remove the cover of the pump tank.
Hook
Ring
Pump
1
Rear Pump
2
Front
Hose connection sticker
Rear: Feedwater hose
1
Front: Feedwater hose
2
1
2
Cover
