15
INSTALLATION: Connecting the Pump Tank
10
Plug the power cord of the pump into the main body.
1)
Connect the power cord labeled as 1 to the
extension cord labeled as 1.
2)
Route the extension cord through the hole on
the top or rear of the table and connect it to the
outlet for Pump 1 in the right side of the main
body.
3)
Connect the power cord labeled as 2 to the
extension cord labeled as 2.
4)
Route the extension cord through the hole on
the top or rear of the table and connect it to the
outlet for Pump 2 on the right side of the main
body.
11
Put the tank back into the table.
12
Connect the feedwater hoses to the tank.
1)
Push the feedwater hose labeled as
into the connection labeled as Pump 1.
Push the hose until it clicks.
2)
Push the feedwater hose labeled as
into the connection labeled as Pump 2.
Push the hose until it clicks.
13
Insert the cuff attached to the drain pipe
into the drain pipe connector.
1
〜
230V
MAX.1A
Pump
〜
230V
Pump
2
MAX.1A
1
Pump
2
Pump
1
2
Drain pipe
Feedwater hoses
