8 - 10
8.3 Replacing the Water and Filter (230V regions)
Replace the processing water and stocking filter in the tank periodically. It is recommended that
the water be replaced for every 100 lenses processed.
NOTE
• When the message “Please Clean Tank & Pump and Replace Filter” appears and the
processing is stopped, replace the processing water and stocking filter, and remove the
waste accumulated on the drain pipe connector.
1. Take the tank out of the cabinet.
Open the cabinet and draw the tank toward you.
2. Disconnect the two feedwater hoses.
Press the red button on the hose to disconnect.
3. Disconnect the drain pipe from the tank.
4. Remove the stocking filter held with a rubber band on the cover.
Drop the stocking filter with the opening bound into the tank so that the processing waster will
not come out.
5. Remove the lid of the tank.
6. Drain the water skimmed off the surface.
7. Dispose of the waste and stocking filter in the tank, following local governing ordinances.
8. Wash the filter attached to the cover.
Wash the filter in water to clean the attached processing waste.
Filter
Summary of Contents for LE-9000DX Express
Page 1: ...NIDEK PATTERNLESS EDGER LE 9000EX Express LE 9000DX Express OPERATOR SMANUAL...
Page 17: ...2 9 or or Top view...
Page 19: ...2 11...
Page 153: ......
