Processing system
Beveling
Auto:
Computer-calculated bevel
Guided:
Manual bevel setting, which enables you to select either
the curve profiling the front surface, the curve profiling
the rear surface, the specified curve value, the position
ratio or tilting amount
EX
Flat (rimless) edging
Flat edging
EX
Grooving
Auto:
Computer-calculated groove position and curve
Guided:
Manual-input groove position and curve
EX
Polishing (Types PL4, PLB, and PLB-2R)
Chamfering
* Grooving and chamfering are available to the LE-9000EX Express only.
Processing lenses
Glass, plastic, high index plastic, polycarbonate, acrylic resin, and trivex lenses (except for glass
with Type PLB)
Processing range
Max.
Lens size:
90 mm or less in diameter
Layout range:
110 mm or less in diameter
Min. (without safety bevel) In flat edging: 28 mm or more in diameter
(when the lens adapter and lens clamp are replaced
for half-eye lenses, up to min. 21 mm dia., vertical
width: 19 mm)(when the optional pliable cup is used,
up to min. 32 mm dia., vertical width: 19 mm)
In beveling:
30 mm or more in diameter
(when the lens adapter and lens clamp are replaced
for half-eye lenses, up to min. 22 mm dia., vertical
width: 20 mm)(when the optional pliable cup is used,
up to min. 33 mm dia., vertical width: 20 mm)
Min. (with safety bevel)
In flat edging: 34 mm or more in diameter
(when the lens adapter and lens clamp are replaced
for half-eye lenses, up to min. 28 mm dia., vertical
width: 25 mm)(when the optional pliable cup is used,
up to min. 32 mm dia., vertical width: 25 mm)
In beveling:
36 mm or more in diameter (when the lens adapter
and lens clamp are replaced for half-eye lenses, up to
min. 29 mm dia., vertical width: 26 mm)(when the
optional pliable cup is used, up to min. 34 mm dia.,
vertical width: 26 mm)
* The processing range may change according to the processing mode.
§9
SPECIFICATIONS
Summary of Contents for LE-9000DX Express
Page 1: ...NIDEK PATTERNLESS EDGER LE 9000EX Express LE 9000DX Express OPERATOR SMANUAL...
Page 17: ...2 9 or or Top view...
Page 19: ...2 11...
Page 153: ......
