4 - 54
NOTE
• In the retouching process, reducing the lens size by more than 0.5 mm may reduce its
vertical width.
Therefore, in trial processing, process a lens with its size 3 mm larger. In actual
processing, do not perform retouching but follow the instructions below beginning
with roughing.
1) Change the size value.
2) Press
twice.
3) Press
to start processing.
• Retouching cannot be performed such as when removing the suction cup, switching R/
L, or reading other frame data.
[Retouching of the groove](LE-9000EX Express only)
Retouching of the groove can be performed by the same procedure with “[Addition of grooving]”
(p. 4-33).
In addition, if the
SIZ
value is changed, retouching of the groove cannot be performed.
Moreover, if “GUI” is selected, any changes other than the groove depth and width to a larger
size cannot be made on the Simulation screen.
[Retouching of the safety bevel](LE-9000EX Express only)
Retouching of the safety bevel can be performed by the same procedure with “[Addition of
chamfering]” (p. 4-49).
In addition, if the
SIZ
value is changed, retouching of the safety bevel cannot be performed.
Summary of Contents for LE-9000DX Express
Page 1: ...NIDEK PATTERNLESS EDGER LE 9000EX Express LE 9000DX Express OPERATOR SMANUAL...
Page 17: ...2 9 or or Top view...
Page 19: ...2 11...
Page 153: ......
