19
Rev
001
•
Camera reset
Select with Hotkey 3
to restore the factory settings.
•
Sequence Record
Select the time interval in which the camera automatically captures an image.
Set of 10 s, 1 hours or ... exceeded a temperature alarm.
•
Sequence Captures
Set here how many times the above setting should be performed
.
4.3.5 Audio settings
See chapter “frequently asked questions” for more details of each item.
•
Imager sounds
Select “Off” to mute all audible outputs.
•
Voice annotation
Select “Session”
to add a voice message at the start of a set of images
(A session ends when the imager is switched off).
Select
“Individual”
to add a voice message to each saved image.
Select “Combined”
to add a common voice message at the start of a set of images
and add additional comments for each image.
•
Voice playback
Select “speaker” or “headset” for the desired method of audible outputs
.
•
Volume
Select the volume of the audible outputs from 1 to 9.
If session is selected the voice message is recorded in the audio settings
by pressing Hotkey 3. Recording is stopped by pressing Hotkey 3 again.
Hotkey 1 can be used to play back the recorded message. Hotkey 3 can
be used to re-record if necessary.
