6
CLEANING INSTRUCTIONS
Do not spray anything on or in the control box. Doing so may damage the broiler.
DAILY CLEANING
Clear broiler of all food product before shutting down to clean. Allow broiler to cool before handling
parts.
1. SHEET METAL PARTS. Remove all trays, drip pans, stripper blades, reflectors, and side
panels. Wash with water and an approved multi-use detergent.
2. SHAFTS. Scrape clean the drive shafts with the special tool provided if necessary.
WEEKLY CLEANING
1. Clean the frame of the broiler as necessary to remove grease build up.
MAINTENANCE
The 615E has very few regular maintenance items. With proper care the broiler will provide many
years of reliable service.
• Handle sheet metal parts carefully to avoid dents and breakage.
• Salts and marinades can corrode the belts and reflectors. If possible, salt food after
removing it from the broiler.
• If you have to replace any of the elements, make sure you order elements that are rated
for the supply voltage to the machine. Rotating the elements periodically will increase
their life.
• The motors contain carbon brushes which will eventually need to be replaced. If you
notice that your motor is running loud, occasionally tripping the breaker switch, or causing
the conveyor to move erratically, replace the motor brushes. Contact your Nieco
Authorized Distributor for replacement brushes.
