24
s
The screen will show 5 manual mode
operations (according to the configuration
realized by the installer) and one program
mode operation (see chapter 9.6.2.2.
PROGRAM MODE Climate management):
9.6.2.1. MANUAL MODE Climate
management
>Winter,
when has a heating
installation (heating).
s
PLANNER has two operation modes:
> Summer,
when has a cool
installation (air conditioning).
In the case one of these two installations is not available, PLANNER will only
show the installed option.
s
Select or
depending on the season.
s
The status bar will show the active
mode or .
s
Select the option to which you desire to
set the reference Temperature
s
To set the reference Temperature, press
on the temperature value in the upper
right of the icon and set the desired
temperature.
s
To confirm, press again over the
Temperature value.
To do the changes in manual mode the Program button does not have to be
active.
o
ng on the seas
.
or
ct the opt
.
ion to wh
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...