31
s
PLANNER shows the state, activated
or deactivated, of the programmed
Automation Functions.
s
Each programmed function can be
connected or disconnected by pressing
on “ON” or “OFF”.
9.6.5. Automation Functions
s
Enables:
>The setting of several operation
parameters of PLANNER: Select of
screen background and lightness
adjustment, date and time, screen
calibration and tones.
>Visualizes the installer’s data
>The access to the configuration of
PLANNER (INSTALLER’S AREA).
9.6.6. Settings
This visualization sensors state page will display the information provided and
configured by the installer
s
The state of the four possible binary
sensors show in general “0” or “1”,
depending whether each of these sensors
are deactivated or activated.
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...