35
(b) Disconnect the established action.
(c) Disconnect the alarm sound.
(d) Disconnect the alarm, which
assumes the adding of the actions (a),
(b) and (c).
9.6.7.1. Assistance Alarm
s
From this page it is possible to connect
or disconnect the assistance alarm.
s
PLANNER shows the state of the
assistance alarm:
> Disconnected:
in the main page the
assistance push button is not shown.
>Connected:
In the main page the
assistance push button is shown.
>Detecting incidence
of assistance
request.
s
From this page, when there is an
incidence of request for assistance, you
can:
(a) Cut the call round to the assistance
incidence notification telephones.
9.6.7.2. Intrusion Alarm
s
From this page it is possible to connect
and disconnect the Intrusion Alarm and
the detection areas which have to be
active in the alarm detection.
s
This page shows the state of the
intrusion alarm:
> Disconnected:
It is possible to
select the intrusion detection areas
desired to be active later, when the
alarm is connected. In the Status
bar, the icon is shown in grey colour,
informing that the intrusion alarm is
disconnected.
> Connected:
It is possible to identify
which area or areas are selected and
therefore actives for the intrusion
detection.
In the status bar, the icon lit in blue
colour informing that the intrusion
alarm is connected.
>Connected and detecting intrusion
in any of its areas.
In the status bar, the icon blinks in red
colour.
bl t
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...
