36
s
PLANNER allows establishing a
courtesy time (established by the installer)
for the connection and disconnection of
the intrusion alarm.
This allows acceding to PLANNER to
deactivate the alarm when arriving to the
house, as well as to connect the alarm
and exit the house without the alarm
being activated.
s
If an intrusion detection is produced in
any of the active detection areas:
(a) Sounds the PLANNER acoustic
alarm.
(b) The intrusion alarm icon in the status
bar blinks in red.
(c) An information window displays
indicating area, date and hour of
detection.
(d) Achieves the round calls to
the assigned telephones until the
notification is confirmed by any of
them.
s
From this page, before an intrusion
detection in any of the areas, you can:
(a) Cut the call round to the intrusion
incidence notification telephones.
(b) Disconnect the established action.
(c) Disconnect the alarm sound.
(d) Disconnect the alarm, which assumes
the adding of the actions (a), (b) and (c).
9.6.7.2.1. Intrusion Alarm control from
the telephone (GSM)
s
When pressing “1”, PLANNER allows
connecting or disconnecting the intrusion
alarm.
PLANNER requests:
<Please, press the function number
you wish to activate/deactivate
… 1: Function one…
…2: Function two…
…3: Function three…
… 4: Thermostat…
…5 : Intrusion Alarm…
…6 : Presence simulation…>
Press 5
<… Please, press 1 to connect or press
0 to disconnect.>
Press 1 or 0.
<The intrusion alarm is connected or
disconnected>
The technical alarms, assistance alarm and notification of Mains fault cannot
be connected or disconnected by telephoning PLANNER.
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...