41
9.6.7.7. Voice messages
s
PLANNER has two pre-recorded
messages (by default) which are used in
its navigation menu when communicates
by phone, to refer to the most important
functions. It is possible to personalize
them with the user’s voice.
>
To record, press , talk loud
and clear to PLANNER.
>
To check the message, press
and PLANNER places a test call to the
desired telephone.
>
To exit this page validating the
configuration, press
s
After recording a new message
replacing the pre-recorded one, select
Own
to use the new recorded message
instead of the pre-recorded one (by
default).”
s
These are the locutions that can be
personalized (following possible locutions
as an example):
>
Control of the lighting, shutter and
scenes functions of “Home”
s
When PLANNER is telephoned, it is
possible to control 3 possible functions of
lighting, shutters and/or scenes.
PLANNER, by default, refers to each one
of these functions, naming them
<Function 1> (GSM1 control),
<Function 2> (GSM2 control) and
<Function 3> (GSM3 control).
As an example:
<Function 1> could be replaced by
<General light>
<Function 2> could be replaced by
<Drawing Room light>
<Function 3> could be replaced by
<Shutters>
p
”
are the lo
l to the
, t
NER.
g
w message
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...