42
>
Incidence notification of intrusion
alarm or technical alarms
s
When PLANNER notifies by phone an
intrusion detected in some of the areas
of detection, it refers to each of them
naming them by default:
<area 1>, <area 2>, <area 3> and
<area 4>.
As an example:
<area 1> could be replaced by
<garden>
<area 2> could be replaced by
<Entry>
<area 3> could be replaced by
<Pool>
<area 4> could be replaced by
<Garage>
s
When PLANNER notifies by phone a
detection (incidence) in any technical
alarm, it refers to each of them naming
them by default:
Technical alarm <one>, technical alarm
<two>, technical alarm <three> and
technical alarm <four>.
As an example:
<one>
could be replaced by
<Kitchen
water>
<two>
could be replaced by
<Gas>
<three>
could be replaced by
<Fire>
<four>
could be replaced by
<Bathroom
water>
s
From this page is possible to activate
the GSM communication unit of
PLANNER.
s
It works at follows:
(1) Make sure that the SIM card is
inserted in the GSM unit installed in
PLANNER.
(2) Introduce the PIN number of the
SIM card if it is protected. If it is not
protected, it is not necessary to key in
the PIN number of the SIM card.
(3) Press on the “State” push button;
if the GSM unit is not activated,
PLANNER informs: “Deactivated”.
(4) In few seconds, PLANNER selects
the telephone operator associated to
the card and makes the connection
automatically.
(5) Press “Stop” in case you want to
cancel the GSM connection during the
connection process.
s
To exit the page press
I
k
f ll
9.6.7.8. GSM Unit configuration
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...