48
10.2. Notification for Technical Alarms
s
If any Technical Alarm is activated,
PLANNER detects it and notifies as
follows:
> Activates the acoustic signal of
PLANNER.
> Informs the incidence in the screen (in
red colour): indicates the technical alarm
detected and the date and time.
> Activates the action plan configured:
activation of water, gas, etc electrovalve.
> Makes the notification phone calls
according to the established order
(Section 9.6.7.5.- Telephones”) (Optional).
s
When an incidence detection occurs in
one of the technical alarms, PLANNER
informs precisely the problem and
acts in consequence according to the
determined configuration.
s
From the house, after confirming the
alarm, through the security Centre in
Technical Alerts, the acoustic signal of
PLANNER can be disconnected, stop the
phone calls round, and disconnect the
alarm.
(Section “9.6.7.3.- Technical Alarms”).
s
In case of receiving the incidence
notification phone call of any of the
Technical Alarms, you could confirm the
alarm from the telephone by pressing
“#”. Thus, the round calls will finalize.
The screen shows the date and time of
the incidence and if the alarm has been
confirmed.
If at the end of the calling process there
is no confirmation, PLANNER sends a
SMS text message with the same text
of the locution to the list of numbers
according to the numbers associated to
the Technical Alarms.
Before a Technical Alarm detection it is not possible to disconnect the alarm
from the phone by calling PLANNER. You could only disconnect the Technical
Alarm from the own house, i.e. directly from the Security Centre in the screen
of PLANNER.
Nor can be managed by telephoning PLANNER on any device associated to
the action plan of the Technical Alarm.
Summary of Contents for domosolutions PLANNER
Page 1: ...USER S MANUAL...