6.3. INTERIOR HEATING
Caravans are equipped with interior heating units powered by propane-
butane gas with a working pressure of 30mbar.
To start the heater:
- connect the gas cylinder through a suitable reducer
- unscrew the heating valve located in the kitchen cupboard,
- turn the knob on the appliance (the gas in the appliance ignites
automatically).
When not using the heater, the valve in the kitchen cabinet that
supplies gas to the appliance should be closed.
A detailed description of the operation, use and technical data of the
heater can be found in the user manual of the appliance.
6.4. SEATING AND SLEEPING AREA
To create a seating area:
- attach the table hooks (mounted at the edge of the table) to the aluminium
slat (2) located on the caravan wall,
- unfold the table leg (4) by pushing the button (3),
- press down the buttons (1) of the table hooks.
To create a sleeping area:
- press down the buttons (1) of the table hooks,
- fold the table leg (4) by pushing the button (3),
- remove the table from the aluminium slat (2) and place it on the slat (6) while
laying the table on the bed edges (5).
1
7
-13-
6.5. INTERNAL SYSTEMS
6.5.1. 12V WIRING SYSTEM
The 12V internal wiring system is used to power the following devices:
- cooler
- water pump
- gas boiler
- interior lighting
and other devices adapted to 12V voltage.
12V voltage is obtained from the power supply unit or from the car battery.
The system is connected to the vehicle with a 13-pin connector according to
ISO 11446
6.5.2. 230V WIRING SYSTEM
To turn on the electrical power supply:
- connect the caravan to an external 230V power supply (using an
extension cord)
- plug the power supply unit into the 230V socket next to the power supply
unit
- switch on the residual current circuit breaker (located next to the power supply)
NOTE !:
1. Never use portable cooking appliances or heaters other than
electric heaters that are not sources of direct thermal radiation due
to the risk of fire or suffocation.
2. Never allow unqualified persons to modify electrical systems and
equipment (230V and 12V).
-14-