SD64 Series
Operating & Safety Instructions
USA – 04/16
Issue 04
35
4.8.2
TOWING
DO NOT TOW MACHINE WITHOUT FOLLOWING THE TOWING PROCEDURE AS
DESCRIBED IN SECTION 5.4 OF THIS MANUAL.
4.8.3
CRANEAGE
1)
Observe all of the limitations relating to straps and chains stated above under ‘Transporting’.
(4.8.1)
2)
When utilising the designated lifting points never apply a ‘snatch’ load, i.e. lift slowly to take up
the load before raising. Similarly, do not drop machine when positioning after lifting.
3)
If the machine is to be lifted by crane, use the designated lifting points and observe the
recommendations regarding spreader beams. Individual drawings are available for each machine
type, on request. (See list below.)
D81489
SD34T
D80891
SD50
D81338
SD64
4.8.4
STORAGE
If being stored for any length of time without use, then the machine should be thoroughly inspected for
the following: -
1)
Grease all bearings /slides, worm drives, etc.
2)
If machine is to be left on an incline, chock wheels to prevent creep.
3)
If machine is to be left outdoors or in a hostile environment, cover with suitable weatherproof
media to prevent deterioration.
Summary of Contents for SD64 4x4x4
Page 2: ......
Page 21: ...SD64 Series Operating Safety Instructions USA 04 16 Issue 04 19...
Page 48: ......
